I-Fume Hood Series Yokukhipha Amagesi Ayingozi

Incazelo emfushane:

I-Fume hood iyithuluzi elivamile laselabhorethri elisetshenziswa ezindaweni zokucwaninga ezidinga ukukhipha amagesi ayingozi, futhi lidinga ukuhlanzwa futhi likhishwe phakathi nokuhlolwa.

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Isingeniso Somkhiqizo

I-Fume hood iwuhlobo lwemishini yaselabhorethri evame ukusetshenziswa kumalabhorethri adinga ukukhipha amagesi ayingozi, futhi enze imisebenzi yokuhlanza nokukhuculula indle ngesikhathi sokuhlolwa.Ngokwempahla, ingahlukaniswa ngesakhiwo sokhuni lwensimbi kanye nesakhiwo sensimbi yonke.

I-DRK-TFG Schematic

I-Steel-wood structure fume hood

I-Drick fume hood iwumklamo owenziwe umuntu womshini wonke, ipulaki nokudlala; ngokwenhloso yokusetshenziswa, ingahlukaniswa ibe yi-stainless steel liner fume hood kanye ne-PP liner fume hood.

Isimiso Sokusebenza

Uhlelo lwamanzi, ugesi, igesi, kanye nokukhipha umoya kufakwe amasokhethi amandla emisebenzi eminingi ukuze kube lula ukusetshenziswa kwezinye izinto zikagesi elabhorethri.

I-valve yokuvula ngokushesha isetshenziselwa ukwenza lula ukusetshenziswa kwamanzi lapho kusetshenziswa.

I-baffle yangaphambili isicabha sengilazi esikwazi ukuya phezulu naphansi, futhi phezulu kuyifenisha yokukhipha umoya enesivinini esiphansi, ekwazi ukukhipha kahle amagesi ayingozi nangenalwazi uma isetshenziswa.

Indawo ephansi yokusebenza ifakwe usinki wensimbi engagqwali, ongakhipha isibulala-magciwane nezinsalela zokuhlola emgodini wokudonsa amanzi ngokugeza ngamanzi ukuze kugcinwe indawo yokuhlola iphephile futhi ithembekile.

Izici ze-Fume hood

1. Sebenzisa ibhodi elingashisi elingu-50% njengohlaka, futhi indawo yokuhlola isebenzisa i-stainless steel (PP) veneer, enokubekwa uphawu okuhle, ukubukeka okuhle, okuqinile nokuqinile.

2. Ifomu lokucindezela elibi likhipha ngokuphumelelayo igesi yokuhlola endaweni yokusebenza.

3. Isibonisi sedijithali sokulawula i-LCD esibonakalayo, isivinini esisheshayo nesinensayo, idizayini enobuntu.

4. Indawo yokusebenza yenziwe nge-SUS304 yensimbi engagqwali (noma impahla ye-PP), okulula ukuyihlanza kanye nokunqanda ukugqwala.

5. Ukumiswa okujwayelekile kobubanzi obuyi-160mm, ipayipi lokukhipha umoya eliyimitha elingu-1 nendololwane.

6. Indawo yokusebenza ifakwe isokhethi elinezimbobo ezinhlanu.

7. Usinki wendawo yokusebenza ozikhethela yona kanye nompompi.

Ipharamitha yezobuchwepheshe:

I-ModelParameter		DRK-TFG-12	DRK-TFG-15	DRK-TFG-18
Isivinini sokukhipha amandla		0.25-0.45m/sIbanga eliguquguqukayo
Umfutho wokungena kwamanzi		＞0.5Pa
Ukunikezwa kwamandla kagesi		I-AC Single phase220V/50Hz
Amandla aphezulu		400W	600W	800W
Isisindo		150Kg	＜200Kg	350Kg
Usayizi wendawo yokusebenza	W1×D1×H1	1030×695×580	1300×695×580	1600×695×580
Ubukhulu	W×D×H	1185×760×1950	1455×760×1950	1755×760×1950
Ukucaciswa kwezibani ze-Fluorescent kanye nobuningi		20W×①	30W×①	20W×②